HD 400 Twin Saddle

  1. Home
  2. Products
  3. HD 400 Twin Saddle
SPECIFICATION SERIVES HD
CAPACITY 400 450 500
Centre height over flat
bedways 400 mm 450 mm 500 mm
Width of Bed 500 mm 560 mm 560 mm
Swing Over Cross Slide 530 mm 650 mm 750 mm
Swing Over Saddle 590 mm 725 mm 825 mm
Swing Over Bed 800 mm 900 mm 1000 mm
Swing IN Gap 1175 mm 1300 mm 1400 mm
Width of Gap in Front of
Face Plate 300 mm 300 mm 300 mm
TECHNICAL DATA
A.B.C. 1000 mm to 8000 mm
MAIN SPINCLE
Type A2-8
Spindle bore diameter / Taper 104mm / MT-6
Taper in centre adaptor MT-6
SPINDLE SPEEDS
Number/Range (in G.P.) 12 Nos. / 20-600RPM
CARRIAGE
Cross Slide Travel 500 600 600
Compound slid travel 250 mm
Maximum section of tools 32 mm x 32 mm
LEAD SCREW
Diameter / Pitch 50.8 MM / 2 TPI
FEED RANGE
Longitudinal (50 Nos) mm/rev 0.078 to 2.34
Cross (50 Nos) mm/rev 0.016 to 0.470
THREADS
mm (19 Nos) Range 1.0 to 30
Inch (42 Nos) Range 1.0 to 30
Module (19 Nos) Range 1.0 to 30
D.P. (48 Nos) 2 to 60
TAIL STOKE
Diameter of Sleeve/bore taper 100 mm / MT-6
Sleeve Travel 250 mm
ELECTRICAL
Suppy (AC) 415 V, 3 Ph, 50 Hz
Main Motor : Power 5.5 Kw / 7.5 H.P. up to 3500 ABC
7.5 Kw / 10 for 4750 & 6000 ABC
Main Motor : Speed 1440 RPM
Rapid Travers motor flr saddle 0.75 Kw
Coolant 0.18 Kw